Gutsibits Guzzi spares
go to Gutsibits home pagego to about us pagesgo to the Shop got to Help Pages
  0 items
 Menu
The Shop

New Parts

Used Spares

Accessories

Guzzi Gifts

Mistral Exhausts
Our phone lines are closed, please  order online from our Shop


Show approximate prices

Our customers say...

official UK distributors of Mistral performance exhaust systems

authorised distributors of ENI Motorcycle oil products

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop      Used Spares  V7 III ALL V9 ALL  Exhausts
Sort by Title
Sort by Price
Page 2 of 4
1  2  3  4  
Rapid Bike Fuelling Fixer
FUA06000 Fits V7 Stone, V7 Special (2013-2015), Nevada 750 (2013-2016), V7 Racer (2013-2015), V7 II ALL, V7 III ALL 
click to view full sizeclick to view full size

This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.

Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.

See installation instructions here.

part in stock 1 in stock

£149.00

INC VAT

£124.17  EX VAT


Mistral Silencers Reverse Cone Polished Long Pair
EXA33371 Fits V7 III Stone, V7 III Special, V7 III Anniversary, V7 III Carbon, V7 III Milano, V7 III Rough 
click to view full size

Pair of long reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in black finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.
3kg lighter than standard silencers
No remap required
Silencer gaskets now included with these silencers

Release the music in your Guzzi!

this part is available by special order This part is available by special order, request a quote

£730.00

INC VAT

£608.33  EX VAT

Mistral Silencers Reverse Cone Short Polished Pair
EXA33373 Fits V7 III Stone, V7 III Special, V7 III Anniversary, V7 III Carbon, V7 III Milano, V7 III Rough, V7 III Racer 
click to view full sizeclick to view full size

Pair of short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers
No remap required

Release the music in your Guzzi!
See this video to hear this silencer

this part is available by special order This part is available by special order, request a quote

£675.00

INC VAT

£562.50  EX VAT

Mistral Racing Silencers Custom Polished Pair Euro 4
EXA39371 Fits V9 (EURO4) 
click to view full sizeclick to view full size

Pair of polished stainless steel performance silencers from Mistral. The reverse cone design compliments the pared back styling of the V9 models. Supplied with removable DB killer and gaskets these are a durable, stylish, lighter and better sounding upgrade.

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Centre stands are compatible with these silencers and no special bracket is required.

No remap required
Gaskets now included with these silencers

Release the music in your Guzzi!

this part is available by special order This part is available by special order, request a quote

£730.00

INC VAT

£608.33  EX VAT

Gasket Exhaust Manifold OE
ENA85090 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT 
click to view full size

Exhaust gasket for standard downpipes

Composite gasket, see ENA85091 for less expensive alternative

this part is available by special order This part is available by special order, request a quote

 852090 MG852090

Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660

£19.00

INC VAT

£15.83  EX VAT

Agostini Performance Silencers Black Euro 4
EXA39101 Fits V9 (EURO4) 
click to view full sizeclick to view full size

Pair of high quality performance silencers finished in black. Made from stainless steel these silencers are both stylish and durable, a stainless steel end cap compliments the black of the middle section of this conical silencer. A removable baffle allows you to choose your volume level.

Standard exhaust shims / gaskets not required when fitting these silencers.

Developed in Mandello by performance experts Agostini

this part is available by special order This part is available by special order, request a quote

£810.00

INC VAT

£675.00  EX VAT

Mistral Centre Stand Stop Bracket Black
FRA33380 Fits V7 III Stone, V7 III Special, V7 III Anniversary, V7 III Carbon, V7 III Milano, V7 III Rough 
click to view full size

Black centrestand stop bracket

this part is available by special order This part is available by special order, request a quote

£25.00

INC VAT

£20.83  EX VAT

Mistral Centre Stand Stop Bracket Satin
FRA33381 Fits V7 III Stone, V7 III Special, V7 III Anniversary, V7 III Carbon, V7 III Milano, V7 III Rough 
click to view full size

Satin finish centrestand stop bracket

this part is available by special order This part is available by special order, request a quote

£25.00

INC VAT

£20.83  EX VAT

Mistral Racing Silencers Reverse Cone Short Black Pair Euro 4
EXA39372 Fits V9 (EURO4) 
click to view full sizeclick to view full size

Pair of short black reverse cone stainless steel performance silencers from Mistral, the short reverse cone design compliments the pared back styling of the V9 models. Supplied with removable DB killer, gaskets and shorter black heat shields these are a more durable, stylish, lighter and better sounding than the original silencers.

Also available in satin or polished finish.

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Centre stands are compatible with these silencers and no special bracket is required.
No remap required

Release the music in your Guzzi!

These now come with laser etched Mistral logo rather than the riveted plates as shown in our photo.
See this video to hear this silencer

this part is available by special order This part is available by special order, request a quote

£705.00

INC VAT

£587.50  EX VAT

Mistral Silencers Reverse Cone Special Ends Polished Pair
EXA33372 Fits V7 III Stone, V7 III Special, V7 III Anniversary, V7 III Carbon, V7 III Milano, V7 III Rough, V7 III Limited 
click to view full sizeclick to view full size

Pair of polished reverse cone stainless steel performance silencers with exclusive aluminium end caps from Mistral. The reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in black finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.
Also available in black
Silencer gaskets now included with these silencers

Release the music in your Guzzi!

this part is available by special order This part is available by special order, request a quote

£855.00

INC VAT

£712.50  EX VAT

Page 2 of 4
1  2  3  4